Technical data

Installing the ARN

114200-D Rev 00

1-23

Table 1-2. V.34 Front-Panel Modem Adapter Module Defaults

Modem Signal/Parameter Default Value

Clear To Send (CTS) On

Data Terminal Ready (DTR) Depends on the modem type. Set the modem to

answer incoming calls when DTR is active.

Data Carrier Detect (DCD) or

received line signal detection

(RLSD)

On while carrier is present (the ARN uses DCD to

detect modem connect and disconnect).

Data Set Ready (DSR) On

Ready to Send (RTS) Ignore

Synchronous/Asynchronous Mode Asynchronous

AutoAnswer Set on

rings with DTR active (

must be greater

than 0).

Local Character Echo Off

Supervisory Functions Off

Baud Rate 28800

Data Bits 8

Stop Bits 1

Parity None