Technical data

Installing the ARN
114200-D Rev 00
1-21
Connecting to the E1/FE1 DSU/CSU Interface
You connect E1/FE1 service to the connector on an installed E1/FE1 adapter
module.
To connect to the E1/FE1 interface:
1.
Insert the RJ-48C cable connector into the E1/FE1 interface
(Figure 1-16
).
Figure 1-16. Connecting the E1/FE1 Cable
2.
Connect the other end of the cable to a FE1communications device.
ARN0090B
1
2
Local Alarm
E1/FE1
G.703
Remote Alarm
Loop
Sync