Technical data

Installing and Operating BayStack ARN Routers
1-20
114200-D Rev 00
Connecting to the FT1/T1 DSU/CSU Interface
You connect FT1/T1 DSU/CSU service to the connector on an installed FT1/T1
DSU/CSU adapter module.
To connect to the FT1/T1 DSU/CSU interface:
1.
Insert the RJ-48C cable connector into the FT1/T1 DSU/CSU interface
on the adapter module (Figure 1-15
).
Figure 1-15. Connecting the FT1/T1 DSU/CSU Cable
2.
Connect the other end of the cable to a T1 communications device.
ARN0065B
1
2
Tx
Rx
Cl
Tx
Rx
Cl
10BaseT
Ethernet 1
10BaseT
Ethernet 2
To
T1device
S/T
ISDN BRI
Compiles with FCC Rules Part 68
Reg. Number 4P8USA-31445-DE-N
Red Alm
FT1/T1
DSU/CSU
Yel Alm
Loop
Sync