Technical data

Index-6
114200-D Rev 00
modem
back-panel interface, C-17
cable
connecting, 1-29
supplied, 1-2
connecting to, 1-30
default settings
adapter module, 1-23
external, 1-29
interface
connecting to, 1-30
pin assignments, C-18
modules, locating, 1-9
N
netboot
attaching a console for, 1-25
attaching a modem for, 1-29
bconfig command, A-8
described, 2-2
ifconfig command, A-2
requirements, 2-2, 2-6
using, 2-6, 2-8
Nonvolatile File System (NVFS), removing, 3-13
O
OSPF, worksheet for, B-9
P
PC console interface, connecting to, 1-25
PCMCIA
LED, 3-3
See also Flash memory
physical specifications, C-1
pin assignments
console interface, C-17
DSU/CSU interface, C-13
Ethernet
10/100BASE-Tx, C-7
AUI, C-6
ISDN
S/T interface, C-12
U interface, C-11
ISDN port connector, C-14
modem interface, C-18
RJ-11, C-16
serial interface, C-10
token ring
STP interface, C-8
UTP interface, C-9
V.34 interface, C-16
ports. See interfaces
power
cables, 1-32
specifications, C-2
switch, 3-11
Power (Pwr) LED, 3-3
powering on the ARN, 3-11
PPP protocol, Bay networks proprietary, B-12
PPP wide area protocol, worksheet for, B-14
preparing for installation, 1-2 to 1-8
product support, xxii
publications, Bay Networks, xxi
Q
Quick-Start procedure
commands, B-17
inst_arn.bat script, 2-15
running, 2-15, B-16
using, 2-15, B-17
worksheet, B-5 to B-8
R
rack-mounting
procedure for, 1-6 to 1-8
required hardware, 1-6
receive (Rx) LED, 3-3, 3-5, 3-9
receive data (RxD) LED, 3-7, 3-8
received line signal detection (RLSD) LED, 3-6, 3-9
received line signal detection 3 (RLSD3) LED, 3-6
received line signal detection 4 (RLSD4) LED, 3-6
received line signal detection 5 (RLSD5) LED, 3-6
receiver (RCVR) LED, 3-4, 3-5
redundant power supply (RPS) LED, 3-3