Specifications

9031398 E3 DCE Management Views

5-3

DCE Agent Configuration View

The DCE Agent Configuration view provides information on the configuration

of the DCE agent and allows modification of some values.

To access this view, do the following:

1. Highlight the DCE icon in the Device view.

2. Select DCE Agent Configuration from the Icon Subviews menu.

or:

1. Highlight the DCE icon in the DCE view.

2. Select DCE Agent Configuration from the Icon Subviews menu.

This view provides the following fields:

Next Boot IP Addr

Displays the IP address of the interface for the next boot. If not used, the value

is 0.0.0.0.

Load Server Addr

Displays the IP address of the load server for the configuration and/or image

file. If not used, the value is 0.0.0.0.

Config File Name

Displays the name of the configuration file currently associated with the

interface. If not used, the value is a zero-length string.

Image File Name

Displays the name of the image file(s) currently associated with the interface.

Some agents in special situations may support a value that contains multiple

file names instead of a single file name. Multiple names are specified as a list

of file names separated by semicolons. If the object is not used, the value is a

zero-length string.

Next Boot Net Mask

Displays the subnet mask of the interface for the next boot. If not used, the

value is 0.0.0.0.

Valid Flag

Indicates whether the configuration and/or image files were downloaded from

this interface and if the file names have not been changed. Table 5-1 list the

NOTE

Each time one or more of the fields are changed, write the new changes out to

the device by updating the view. Once the changes have been written out to the

device, save these changes to Non-Volatile RAM (NVRAM) by setting the Write

Configuration Settings to NVRAM and updating the view. Any changes made

that are not saved to NVRAM will be lost when the NMM is reset.