Specifications

DCE Configuration View
DCE Management Views
5-2
SynOptics Series 5000
Management Module Guide
DCE Configuration View
The DCE Configuration view provides information on the configuration of the
DCE and allows modification of some values.
To access this view, do the following:
1. Highlight the DCE icon in the Device view.
2. Select DCE Configuration from the Icon Subviews menu.
or:
1. Highlight the DCE icon in the DCE view.
2. Select DCE Configuration from the Icon Subviews menu.
This view provides the following information:
Model Name
Displays the type and identity of the DCE in the following format:
DCE_1.1_5310 (where DCE describes the device, 1.1 indicates the position of
the module in the hub and the number of the DCE on the module, and 5310
indicates the type of module containing the DCE).
Network Address
Displays the IP address of the DCE.
Module
Displays the number specifying the location of the module containing the DCE
in the hub.
DCE
Displays the number uniquely identifying the DCE on the module.
Current Attachment
Provides a button displaying, and allowing you to change, the identifier (i.e.,
SEG-1 indicates Segment 1) indicating which segment the DCE is currently
connected to. By changing this identifier, the DCE is changed to a different
segment, or isolated from all segments.
Last Change
Displays the value of SysUpTime when the last attachment change on the DCE
was detected. If none have been detected since cold/warm start of the agent, the
value is zero.