Specifications

Token Ring NMM Management Views
Token Ring NMM Ring Topology Table View
NMM Management Views
4-12
SynOptics Series 5000
Management Module Guide
2. Select NMM Topology from the Icon Subviews menu.
or:
1. Highlight the NMM Agent icon in the NMM Agent view.
2. Select NMM Topology from the Icon Subviews menu.
The Token Ring NMM Topology Table view provides the following information:
Interface Address
Displays the IP address of the interface on which the topology message was
received.
IP Address
Displays the IP address of an NMM contained in a topology message.
Ring Number
Displays the number identifying the ring on which an NMM from a topology
message is located.
Ring Master
Displays the classification of an NMM from a topology message. Possible
values are: Normal (not a master NMM) and Master (a master NMM).
Ring Speed
Displays the speed of the ring (in units of Mbits) on which an NMM from a
topology message is located. Possible values are: 4 Mbps and 16 Mbps.
Token Ring NMM Ring Topology Table View
The Token Ring NMM Ring Topology Table view provides a listing of all the
NMMs with a token ring interface on the same ring as the reporting NMM.
The number of entries is determined by the number of detected and active
NMMs. Entries in the table are created by reception of a topology message
from a “new” NMM. An entry is automatically removed from the table after no
messages are received from the NMM in the required time interval. It is
possible to sort, update, and search the table. To activate the Sort button,
click a column heading. Click the Sort button to sort the table based on the
selected column. To activate the Find button click the MAC Address column
heading. Enter the search string at the prompt.
To access this table, do the following:
1. Highlight the NMM module in the Device view.
2. Select NMM Ring Topology from the Icon Subviews menu.
or:
1. Highlight the NMM Agent icon in the NMM Agent view.
2. Select NMM Ring Topology from the Icon Subviews menu.