Specifications

9031398 E3 NMM Management Views
4-11
Token Ring NMM Management Views
Token Ring NMM Topology Table View
To activate the Find button click the Mac Address or Vendor column heading.
Enter the search string at the prompt.
To access this table, do the following:
1. Highlight the NMM module in the Device view.
2. Select NMM Find Nodes from the Icon Subviews menu.
or:
1. Highlight the NMM Agent icon in the NMM Agent view.
2. Select NMM Find Nodes from the Icon Subviews menu.
The TR NMM Find Nodes Table provides the following information:
Interface
Displays the number identifying the source that detected the active node.
Values greater than zero represent the index of the agent’s interface in the
NMM. A value of zero indicates that the agent detected the node information
through the best available method.
MAC Address
Displays the physical (MAC) address of the station.
Vendor
Displays the manufacturer of the device connected to that port. This is
determined from the MAC address.
Module
Displays the number identifying the position of this module in the chassis.
Port
Displays the number identifying the position of this port on the module.
Token Ring NMM Topology Table View
The Token Ring NMM Topology Table view provides a table of topology
information from each NMM with a token ring interface on the same flat
network as the reporting NMM. The number of entries is determined by the
number of detected and active NMMs. Entries in the table are created by
reception of a topology message from a “new” NMM. An entry is automatically
removed from the table after no messages are received from the NMM in the
required time interval. It is possible to sort, update, and search the table. To
activate the Sort button, click on a column heading. Click the Sort button to
sort the table based on the selected column. To activate the Find button, click
the MAC Address column heading. Enter the search string at the prompt.
To a ccess this table, do the following:
1. Highlight the NMM module in the Device view.