Specifications

Token Ring NMM Management Views
TR NMM Find Nodes Table
NMM Management Views
4-10
SynOptics Series 5000
Management Module Guide
or:
1. Highlight the NMM Agent icon in the NMM Agent view.
2. Select NMM Show Nodes from the Icon Subviews menu.
This view provides the following information:
Interface
Displays the number identifying the source that detected the active node.
Values greater than zero represent the index of the agent’s interface in the
NMM. A value of zero indicates that the agent detected the node information
through the best available method.
Module
Displays the number identifying the position of this module in the chassis.
Port
Displays the number identifying the position of this port on the module.
Mac Address
Displays the physical (MAC) address for the station.
Vendor
Displays the manufacturer of the device connected to that port. This is
determined from the MAC address.
Status
Displays the operational status of the MAC address for the station. Table 4-11
lists status values which are valid entries, and descriptions of each value.
TR NMM Find Nodes Table
The TR NMM Find Nodes Table provides a list of all the active MAC
addresses that the NMM currently recognizes on all segments, and also all
active MAC addresses recognized by each DCE on the module. It is possible to
sort, update, and search the table. To activate the Sort button, click a column
heading. Click the Sort button to sort the table based on the selected column.
Table 4-11. Operational Status of MAC Address
Value Description
Active (2) Read-only status indicating the station has sent a frame
within the required time period, or for Token Ring or FDDI,
that the station is in the ring poll.
Inactive (3) Read-only status indicating the station is idle, having sent
no frames within the required time period.
Other (1) Read-only status indicating the address is unknown or in
some other state.