Specifications

NMM Trap Receiver View
NMM Management Views
4-6
SynOptics Series 5000
Management Module Guide
Write Configuration Settings to NVRAM
Provides a button that allows you to write the current configuration settings
to local non-volatile random access memory (NVRAM). Table 4-8 lists values
which are valid entries, and descriptions of each value.
Reboot Agent
Provides a button allowing you to reboot the agent. Table 4-9 lists values
which are valid entries, and descriptions of each value.
NMM Trap Receiver View
The NMM Trap Receiver view provides information and addresses for devices
receiving traps. The maximum and current number of trap receivers are
displayed with the Trap Receiver Table.
To access this view, do the following:
1. Highlight an NMM module in the Device view.
2. Select NMM Trap Receiver from the Icon Subviews menu.
or:
1. Highlight an NMM Agent icon in the NMM Agent view.
This view provides the following information:
Table 4-8. Write Configuration Settings to NVRAM
Value Description
valid contents valid
write write configuration settings to local storage
other some unknown or other state
Table 4-9. Reboot Agent Values
Value Description
other agent in unknown or other state
running agent running
restart restart agent (i.e., jump to beginning of agent code)
reboot start boot sequence for agent (i.e., jump to beginning of boot
firmware
reset do a hardware reset