Specifications

NMM Agent Configuration View
NMM Management Views
4-2
SynOptics Series 5000
Management Module Guide
NMM Agent Configuration View
The NMM Agent Configuration view displays and provides detailed
information on the configuration of the agent, including the initial boot
information.
To access this view, do the following:
1. Highlight the NMM module in the Device view.
2. Select NMM Agent Configuration from the Icon Subviews menu.
or:
1. Highlight the NMM Agent icon in the NMM Agent view.
2. Select NMM Agent Configuration from the Icon Subviews menu.
This view provides the following information:
RAM Version
Displays the version of the agent. This is an alias for the RAM of the module
containing the agent.
Initial Boot Info Source
Displays the source for initial protocol configuration information at next boot.
For IP, a setting of “net using bootp” means that BOOTP will be used to get
the agent’s IP address(es), load server address, and configuration file name.
For IPX, a setting of “net using bootp” means SAP will be used to get the
agent’s Novell network number(s), and the configuration filename will be
loaded from local storage.
Table 4-1 lists values which are valid entries, and descriptions of each value.
The load server address is not configurable and is not available in this MIB
object on a Novell network.
Local Storage Version
Displays the version of the agent saved in local storage (such as flash memory)
in the form “major.minor.maintenance.” If not known or not available, then
the value is a zero length string.
Table 4-1. Initial Boot Info Source Entries
Value Description
local Do not use the network.
net using bootp Try using the network, and if that fails then use protocol
configuration information from local storage.
other Not applicable, or some other case.