Specifications

Chassis Modeling Information View
Chassis Management Views
3-2
SynOptics Series 5000
Management Module Guide
To access the Chassis Modeling information view, do the following:
1. Within the Location view, highlight the Device icon.
2. From the Icon Subviews menu, select Chassis Modeling
Information.
NMM Agents
This table displays the NMM agents loaded in the chassis, providing
information on each agent’s module, interface, and network address. This table
also has three buttons, allowing you to sort the table by a statistic type, search
the table for a certain value, or update the information contained in the table.
To sort the table based on the values in a selected column, click a column
heading to select the value type to sort the table by, then click Sort to initiate
the process. To update the information contained in the table, click Update.
Community Names
This area of the Modeling Information view displays a list of the community
names currently entered as valid names associated with the NMM agents in
the chassis. NMM agents with community names other than those contained
in this window are undiscoverable by the chassis. If the community name of an
agent is changed, or a new agent with a new community name is added, enter
the new name in Community Names area, as follows:
1. Enter the community names for the other active NMM Agents in the
chassis into the Community Names window in this view. Be sure to add a
<return> after every entry.
2. Single-click the Reconfigure Chassis Agents button. A pop-up dialog box
appears, indicating the success of the action. Click OK.
3. Exit this view.
NMM Agent Models
Displays a list of the NMM agent models currently entered in the SPECTRUM
database, and associated with this chassis model. This area provides the name,
slot number, and community name for each NMM agent model displayed.