Specifications

9031398 E3 Device Views
2-17
Logical Module Representation
FDDI Modules
Set Count
Displays a count incremented in response to a Set operation on the MIB. The
transition timestamp is not included.
Last Set Station ID
Displays the ID of the station which performed the last set.
Configuration Capabilities
Displays a group of read-only indicator buttons that indicate the configuration
capabilities of a node. Table 2-9 lists possible values and their descriptions.
FDDI SMT Parameters View
To access this view, do the following:
1. Highlight the SMT icon on the FDDI NMM logical module.
2. Select SMT Parameters from the Icon Subviews menu.
The view displays the following information:
Intelligent Insertion Policy
Displays the Intelligent Insertion policy used by the SMT on this concentrator.
Possible values are “on” and “off”. The default is “on”.
Intelligent Insertion Mask
Displays the Intelligent Insertion Policy Bit Mask.
Trace_Max Expiration
The reference Trace_Max.
Status Report Policy
If true, indicates that the node will generate Status Reporting Frames for its
implemented events and conditions. It has an initial value of “true”.This
variable determines the value of the SR_Enable Flag.
Notify Timer
Displays the timer, expressed in seconds, used in the Neighbor Notification
protocol. It has a range of 2 seconds to 30 seconds, and its default value is 30
seconds.
Table 2-9. Configuration Capabilities
Value Description
holdAvailable Indicates the support of the optional Hold function.
cf-wrap-ab Indicates that the station has the capability of performing a
wrap_ab.