Specifications

Logical Module Representation
Device Views
2-10
SynOptics Series 5000
Management Module Guide
Ethernet Backplane Segment Statistics View
This view lists all Ethernet segments on the backplane and provides the
following buttons and fields for each:
Allows you to update the information on the table.
Displays the total errors as described below.
Allows setting of a value against which a selected column is filtered, or clear a
previously set filter value.
Allows sorting of the table, based on the values in a selected column.
Src Index
Displays the index of the entry in the table.
Good Frames
Displays the total number of good frames detected on this segment.
Collisions
Displays the total number of collisions detected on this segment.
Alignment
Displays the total number of misaligned packets detected on this segment.
FCS Errors
Displays the total number of frames received that are an integral number of
octets in length but do not pass the Frame Check Sequence (FCS).
Runts
Displays the total number of runt packets received by this segment. A runt
packet is one byte less than the standard Ethernet frame of 64 bytes, not
including preamble.
Giants
Displays the total number of giant packets received by this segment. A giant
packet exceeds 1518 bytes, not including preamble.
Update
Totals
Set/Clear Filter
Sort Up/Down/Unsort