Specifications

Logical Module Representation
The Backplane Module
Device Views
2-4
SynOptics Series 5000
Management Module Guide
Backplane Menu Selections
Positioning the cursor on the Module Identifier, Protocol Identifier, or on a
Segment Identifier, and pressing the right mouse button accesses the Icon
Subviews menu for the selected area of the logical module. Another way to
access the Icon Subviews menu is by clicking the Module Identifier, Protocol
Identifier, or a segment, which highlights the model, and then selecting Icon
Subviews from the view menu.
Redundancy Table
The Redundancy Table provides redundancy status and control for each
redundancy-capable port in the Series 5000 chassis. Only the following types
of redundancy-capable ports appear in the table:
• Ports with remote fault signaling capability
• Ports without remote fault signaling capability which depend on link
status to provide redundancy
To access the Redundancy Table, do the following:
1. Within the Logical Device view, highlight the “ENET” icon.
2. From the Icon Subviews menu, select Redundancy Table.
or:
1. Within the Application view, highlight the Syn5EnetApp Icon.
2. From the Icon Subviews menu, and select Redundancy Table .
The Redundancy Table provides the following information:
Last Change
Displays the “sysUpTime” value when the last change to any Redundancy
Table entry was detected.
Module
Displays the slot in the hub containing the board on which the port is located.
Port
Displays the number of the port on the board.
Capability