Specifications

Modeling the SynOptics Series 5000 Hub
SynOptics Series 5000 Icons
Introduction
1-12
SynOptics Series 5000
Management Module Guide
•The Edit -> New Model By IP... option which uses SPECTRUM default
icon parameters.
• A device icon can also be created using AutoDiscovery (see the
AutoDiscovery User’s Guide).
In order for SPECTRUM to properly model the SynOptics Series 5000 hub, it
must locate, identify, and model all active NMM Agents. For this to be
accomplished, provide SPECTRUM with the community names for all of the
active NMM Agents.
• When creating a device icon with the Edit -> New Model... method, you
can provide the community name corresponding to an IP address of the
device icon being created and the additional community names for all the
active NMM Agents at the time of creation. If you do not provide the NMM
Agent community names when creating the device icon with this method,
you can add them later with the Chassis Modeling Information view.
• When creating a device icon with the Edit -> New Model By IP...
method, you can only provide the community name corresponding to an IP
address of the device icon being created. You must add the additional
community names for all of the NMM Agents active on the device through
the Chassis Modeling Information view.
• When creating a device icon with AutoDiscovery, add the additional
community names for all of the NMM Agents active on the device through
the Chassis Modeling Information view.
See Chapter 3, Chassis Management Views, for information on using the
Chassis Modeling Information view to add additional community names.
Other Icons
This section describes the additional icons that are created automatically
when you create a SynOptics Series 5000 device icon. These icons represent
the NMM Agent models, Data Collection Engine (DCE) models, and other
supported applications such as repeating and SynOptics common
applications.
NMM Agent Icons
SPECTRUM creates this icon to represent the agent on an NMM module in the
SynOptics Series 5000 chassis. Network management stations can access
information and manage the chassis through the NMM Agents. The NMM
Agent models “Manage” application models, such as MIB-II. An example of an
NMM Agent icon is shown below.