Specifications

Modeling the SynOptics Series 5000 Hub
NMM Modules
Introduction
1-10
SynOptics Series 5000
Management Module Guide
Figure 1-3 shows an example of a D5000 Logical Device view.
Figure 1-3. D5000 Logical Device View
The D5000 Logical Device view contains the same functionality described in
Chapter 2, except as previously noted.
NMM Modules
One NMM module provides management for up to 8 cascaded chassis. Only
one NMM is active at a time. If there is more than one NMM in the cascaded
unit, the NMM located in the lowest numbered unit is active. the other NMM
modules are in warm standby. The single NMM module provides access to the
NMM Agent views.
Modeling the SynOptics Series 5000 Hub
This section describes the SpectroGRAPH icons that will be used to model and
manage a SynOptics Series 5000 hub in SPECTRUM. It also provides an
example of setting up a Series 5000 modeling hierarchy in a SPECTRUM
Topology view.
SynOptics Series 5000 Icons
The SynOptics Series 5000 management module provides icons that represent
the physical hub device model, its interfaces, the NMM agent model, and
supported application models. The following sections provide a description of
these icons.
5DN310
14
SEG1 SEG2 SEG3
<1% <1% <1%
1 S1
LINK
3
S1
LINK
4 S1
5 S1
LINK
6 S1
LINK
7 S1
NLNK
8 S1
LINK
9 S1
NLNK
10 S1
LINK
11 S1
LINK
12
S1
NLNK
5DN308P
11
2 S1
NLNK
LINK
1
S1
LINK
3 S1
LINK
4
S1
5
S1
NLNK
6
S1
NLNK
7
S1
LINK
8
S1
LINK
9
S1
NLNK
10
S1
LINK
11
S1
NLNK
12
S1
NLNK
5DN308P
12
2
S1
NLNK NLNK
10
5DN003
LC - 1 LC - 2 LC - 3
ENET
SEG 1 SEG 2 SEG 3