Specifications

Port Parameters View
FDDI Modules SynOptics Series 5000
C-10 Management Module Guide
MAC Placement
Indicates the MAC, if any, whose transmit path exits the station via this port.
The value is zero if there is no MAC associated with the port. Otherwise, the
MACIndex of the MAC is the value of the variable.
Remote MAC Indicated
Displays the indications in PC-Signalling of the intent to place a MAC in the
output token path to a port.
PMD Class
Indicates the type of PMD entity associated with this port. Values are
Multimode, Single-mode1, Single-mode2, Sonet, Low-cost-fiber, Twisted-pair,
Unknown, and Unspecified.
BS Flag
Assumes the value of the BS_Flag; values are True and False.
EB Error Count
Displays a count that should as closely as possible match the times an
Elasticity Buffer Error has occurred while in active line state.
Connection Capabilities
pc-mac-lct
Displays a flag internal to the Physical Connection Management (PCM) that
indicates that a MAC can be used for the Link Confidence Test.
pc-mac-loop
Displays a flag internal to the PCM that indicates that a MAC Local Loop can
be used for the Link Confidence Test before the connection is made active.
Port Parameters View
The SynOptics FDDI Port Parameters view contains port parameter
information for the SynOptics FDDI 5000 Series. This view provides the
following information:
SMT Index
Displays the number of SMT implementations (regardless of their current
state) on this network management application entity. The value for this
variable must remain constant at least from one re-initialization of the
entity’s network management system to the next re-initialization.