Specifications

9031398 E3 FDDI Modules
C-7
Configuration Views
Attachment Configuration View
Configuration Changes
Displays the total number of configuration changes for the module detected
since the cold/warm start of the agent or since the insertion of the module.
Set Current Attachment For All Attachments
Provides a button with which to choose NET 1-5, other, or ISOL.
Module Attachment Table
The Module Attachment Table, at the bottom of the Module Configuration
view, provides information on each of the attachments on the module. Double-
click any entry in this table to access the Attachment Configuration view,
described later in this chapter. A Print button allows you to output a copy of
this table to a printer or a file. This table provides the following information:
Attachment
Displays the number identifying the network attachment point on the module.
Current
Displays the current channel or segment for this attachment (for example,
NET_2).
Default
Displays the default channel or segment for this attachment (for example.,
NET_1).
Changes
Displays the number of changes for the attachment detected since cold/warm
start of the agent or since the insertion of the module.
Last Change
Displays the value of SysUpTime when the last change on the attachment was
detected. If no change has been detected since cold/warm start of the agent,
the value is zero.
Attachment Configuration View
Each of the attachments on the module has an Attachment Configuration
view. These views provide information on the configuration of each specific
attachment and allow modification of some values.
Access one of these configuration views by selecting Network Attachment
Configuration from the Icon Subviews menu.
These views provide the following fields:
Module
Displays the number specifying the location in the hub of the module having
the attachment.