Specifications

Configuration Views
Module Configuration View
FDDI Modules SynOptics Series 5000
C-6 Management Module Guide
Module Configuration View
The Module Configuration view provides an attachment table as well as
information on the configuration of the module and allows modification of
some values.
Access the Module Configuration view by selecting Module Configuration
from the Icon Subviews menu for the module.
This view provides the following fields:
Module
Displays the number specifying the location of the module in the hub.
Manufacture Date
Displays in ASCII the date of manufacture of the module following the format:
yyyymmdd. For example, the value for April 13, 1993 is 19930413. If the date
is not available, a zero length string is used.
Attachments
Displays the total number of backplane network attachment points on the
module.
Attachment Changes
Displays the total number of attachment changes for the module detected
since cold/warm start of the agent or since the insertion of the module.
Last Attachment Change
Displays the value of SysUpTime when the last attachment change on the
module was detected. If no change has been detected since cold/warm start of
the agent, the value is zero.
Configuration Source
Displays the source of the configuration at the last module reset. Table C-5
lists the possible configuration source values and descriptions for each value.
Table C-5. Configuration Source Values
Value Description
Other (1) Unknown or some other value
DfltJmpr (2) Default jumpers
PrmMem (3) Permanent memory on the module
BrdCfg (4) Saved configuration on the module
Sm (5) Supervisor
SmDfltJmpr (6) SM and default jumpers
SmPrmMem (7) SM and permanent memory on the module