Specifications

9031398 E3 FDDI Modules
C-5
Configuration Views
Attachment Segment Identifier
Displays an identifier indicating relationship. Possible identifiers are as
follows: “M” (Master) or “S” (Slave).
Port Link Status
Displays the status of the port. Double-click this status area to open the Port
Configuration view. Table C-3 lists possible status values, their corresponding
colors, and descriptions of each value.
Port Label Icon Subviews Menu Selections
Tabel C-4 provides definitions of the Logical Port Icon Subviews menu
selections described in this chapter. See Chapter 1, Introduction for
information on Accessing SPECTRUM Views from the Device Icon.
Configuration Views
These views provide detailed information on the module, attachment, and port
configuration. Access each specific configuration view from the Icon Subviews
menu for that area of the logical module (refer to Figure C-1). The following
sections provide more detailed information on each configuration view.
Table C-3. Port Link Status Values
Status Color Description
DIS Red Disabled, Port is Active
DIS Blue Disabled, Port is Inactive
CON Yellow Enabled, Port is Inactive
SBY Red Standby
ACT Green Enabled, Port is Active
Table C-4. Logical Port Icon Subviews Menu Selections
Menu Selection Description
Port Notes Opens the Port Notes Facility, described in the SPECTRUM
Views
.
Port Profile Opens the Port Profile view for the selected port.
Port Configuration Opens the Port Configuration view for the selected port.
Port Parameters Opens the Port Parameters view for the selected port.
Port LER Threshold Opens the Port LER Threshold view for the selected port.