Specifications

Configuration Views
Attachment Configuration View
Token Ring Modules SynOptics Series 5000
B-8 Management Module Guide
Default
Displays the default channel or segment for this attachment (for example.,
MR_1).
Changes
Displays the number of changes for the attachment detected since cold/warm
start of the agent or since the insertion of the module.
Last Change
Displays the value of SysUpTime when the last change on the attachment was
detected. If no change has been detected since cold/warm start of the agent,
the value is zero.
Default Speed
Displays the default speed.
Current Speed
Displays the current speed.
Attachment Configuration View
Each of the attachments on the module has an Attachment Configuration
view. These views provide information on the configuration of each specific
attachment and allow modification of some values.
Access one of these configuration views by selecting Attachment
Configuration from the Icon Subviews menu for the desired port
representation.
These views provide the following fields:
Module
Displays the number specifying the location in the hub of the module having
the attachment.
Attachment
Displays the number specifying the location of the attachment on the module.
Current Attachment
Provides a button displaying (and allowing change of) the current setting for
the attachment point. The position of the module within the hub, the setting
of the backplane divider switch(es), and the mode setting all affect which
backplane networks are valid. Some modules may limit the use of certain
backplane network(s) or local channel(s).
Last Change
Displays the value of SysUpTime when the last attachment change for the
attachment point was detected. If no change has been detected since cold/
warm start of the agent, the value is zero.