Specifications

Configuration Views
Token Ring Modules SynOptics Series 5000
B-6 Management Module Guide
Table B-5 provides definitions of the Logical Port Icon Subviews menu
selections described in this chapter. See Chapter 1, Introduction for
information on Accessing SPECTRUM Views from the Device Icon.
Configuration Views
These views provide detailed information on the module, attachment, and port
configuration. Access each specific configuration view from the Icon Subviews
menu for that area of the logical module (refer to Figure B-1). The following
sections provide more detailed information on each configuration view.
Module Configuration View
The Module Configuration view provides an attachment table as well as
information on the configuration of the module and allows modification of
some values.
Access the Module Configuration view by selecting Module Configuration
from the Icon Subviews menu for the module.
This view provides the following fields:
Module
Displays the number specifying the location of the module in the hub.
Manufacture Date
Displays in ASCII the date of manufacture of the module following the format:
yyyymmdd. For example, the value for April 13, 1993, is 19930413. If the date
is not available, a zero length string is used.
Attachments
Displays the total number of backplane network attachment points on the
module.
Table B-5. Logical Port Icon Subviews Menu Selections
Menu Selection Description
Port Notes Opens the Port Notes Facility, described in the SPECTRUM
Views
.
Attachment
Configuration
Opens the Configuration view for the selected port.
Station Port
Configuration
Opens the Station Port Configuration view for the selected
station port.
Enable/Disable Port Opens the Enable/Disable Port dialog box allowing you to
read or change the port state.