Specifications

Token Ring Modules
Token Ring Module Icon
Token Ring Modules SynOptics Series 5000
B-4 Management Module Guide
Token Ring Module Icon
The logical representation of SynOptics modules provides graphical
information about the module, local rings, module rings, clusters, and the
individual ports and attachments to the hub’s backplane. This appendix
describes the various views and information available from each area of the
logical module. Figure B-1 displays a logical representation of a SynOptics
module.
The Logical Module Icon consists of two areas providing information
pertaining to the module. These areas have the following functions:
Module Number
Displays the number identifying the module’s position in the hub and provides
a menu access zone for the module Icon Subviews menu. Double-click the
module number to open the Module Notes facility.
Module Type
Displays the type of module being modeled and provides a menu access zone
for the module Icon Subviews menu.
Token Ring Module Icon Subviews Menu
Table B-2 provides definitions of the Logical Module Icon Subviews menu
selections described in this chapter. See Chapter 1, Introduction for
information on Accessing SPECTRUM Views from the Device Icon.
Port Icons
The Port Icons each consist of three areas providing information pertaining to
the port. These areas have the following functions:
Port Identifier
Displays the number uniquely identifying this port on the module. Double-
click this number to open the Port Notes facility.
Table B-2. Token Ring Module Icon Subviews Menu Selections
Menu Selection Description
Module Notes Opens the SPECTRUM Notes facility for the module,
described in the
SPECTRUM Views.
Module Configuration Opens the Configuration View for the selected module.
MR X Backplane
Connection
Opens the Backplane Connection view for module ring
number X where X represents the number identifying the
ring (1-5).