Specifications

Ethernet Module Icon
Logical Port Icons
Ethernet Modules SynOptics Series 5000
A-12 Management Module Guide
Logical Port Icon Subviews Menu Selections
Table A-10 provides definitions of the Icon Subviews menu selections,
described in this chapter. See Chapter 1, Introduction for information on
Accessing SPECTRUM Views from the Device Icon.
Port Configuration View
The Port Configuration view provides information on the configuration of the
selected port and allows modification of some values.
1. Within the Logical Device view, highlight the Ethernet Module icon.
2. From the Icon Subviews menu, select Port Configuration.
This view provides the following information:
Module
Displays the number specifying the location in the hub of the module the port
is on.
Port
Displays the number uniquely identifying the selected port on the module.
Part Status
Provides a button displaying, and allowing you to change, the partition status
of the selected port. Table A-11 lists and describes the possible partition status
values.
Table A-10. Logical Port Label Icon Subviews Menu Selections
Menu Selection Description
Port Notes Opens the Port Notes Facility.
Port Configuration Opens the Configuration View for the selected port.
Port Performance Opens the Performance View for the selected port.
Enable/Disable Port Opens the Enable/Disable Port View.
Table A-11. Partition Status Values
Status Description
Other Partition status is unknown (Read Only)
Enabled Port is enabled (Read-Write)
Partition Port is partitioned (Read-Write)
AutoPartition Port is auto-partitioned by the hardware (Read Only)
TimedPartition Port is configured for timed partitioning (Read-Write)