Specifications

Ethernet Module Icon
Ethernet Module Icon Subviews Menu Selections
Ethernet Modules SynOptics Series 5000
A-6 Management Module Guide
Module Attachment Table
The Module Attachment Table, at the bottom of the Module Configuration
View provides information on each of the attachments on the module. Double-
click any entry in this table to access the Attachment Configuration View,
described later in this chapter. A Print button allows output of a copy of this
table to a printer or a file. This table provides the following information:
Attachment
Displays the number identifying the network attachment point on the module.
Current
Displays the current channel or segment for this attachment (e.g., Seg_1).
Default
Displays the default channel or segment for this attachment (e.g., Seg_1).
Changes
Displays the number of changes for the attachment that have been detected
since cold/warm start of the agent or since the module was inserted.
Last Change
Displays the value of SysUpTime when the last change on the attachment was
detected. If none have been detected since cold/warm start of the agent, the
value is zero.
Attachment or Cluster Configuration View
An Attachment or Cluster Configuration View is provided for each of the
attachments or clusters on the module. These views provide information on
the configuration of each specific attachment or cluster, and allow
modification of some values.
1. Within the Logical Device view, highlight the Ethernet Module icon.
2. From the Icon Subviews menu, select Attachment X Configuration or
Cluster Configuration .
This view provides the following information:
Module
Displays the number specifying the location in the hub of the module the
attachment is on.
Attachment (5308P)
Displays the number specifying the location of the attachment on the module.
Cluster (5378-F)
Displays a letter uniquely identifying the selected cluster on the module.