Specifications

9031398 E3 Ethernet Modules
A-5
Ethernet Module Icon
Ethernet Module Icon Subviews Menu Selections
Attachments
Displays the total number of backplane network attachment points on the
module.
Attachment Changes
Displays the total number of attachment changes for the module that have
been detected since cold/warm start of the agent or since the module was
inserted.
Last Attachment Change
Displays the value of SysUpTime when the last attachment change on the
module was detected. If none have been detected since cold/warm start of the
agent, the value is zero.
Configuration Source
Displays the source of the configuration at the last module reset. Table A-3
lists and describes the possible configuration source values.
Configuration Changes
Displays the total number of configuration changes for the module that have
been detected since the cold/warm start of the agent or since the module was
inserted.
Set Current Attachment for All Attachments
Provides a button displaying, and allowing you to change, the current setting
for all of the the attachment points. The position of the module within the hub,
the setting of the backplane divider switch(es), and the mode setting all affect
which backplane networks are valid. Also, some modules may put limitations
on which backplane network(s) or local channel(s) may be used. Possible
readings are ISOL, SEG-#, and LOC-#.
Table A-3. Configuration Source Values
Value Description
Other (1) Unknown or some other value
DfltJmpr (2) Default jumpers
PrmMem (3) Permanent memory on the module
BrdCfg (4) Saved configuration on the module
Sm (5) Supervisor Module
SmDfltJmpr (6) SM and default jumpers
SmPrmMem (7) SM and permanent memory on the module