Specifications

Ethernet Module Icon
Ethernet Module Icon Subviews Menu Selections
Ethernet Modules SynOptics Series 5000
A-4 Management Module Guide
Ethernet Module Icon Subviews Menu Selections
Table A-2 provides definitions of the Icon Subviews menu selections, described
in this chapter. See Chapter 1, Introduction for information on Accessing
SPECTRUM Views from the Device Icon.
Module Configuration View
The Module Configuration View provides an attachment table as well as
information on the configuration of the module, and allows modification of
some values. To access this view do the following:
1. Within the Logical Device view, highlight the Ethernet Module icon.
2. From the Icon Subviews menu, select Module Configuration.
This view provides the following information:
Module
Displays the number specifying the location of the module in the hub.
Manufacture Date
Displays the date of manufacture of the module, in ASCII, following the
format: yyyymmdd. For example, the value for April 13, 1993 is 19930413. If
the date is not available, a zero length string is used.
Table A-2. Ethernet Module Icon Subviews Menu Selections
Menu Selection Definition
Module Notes Opens the SPECTRUM Notes facility for the module,
described in the
SPECTRUM Views.
Module Configuration Opens the Configuration View for the selected module.
Attachment 1
Configuration (5308)
Opens the SynOptics 5000 Ethernet Attachment
Configuration View.
Attachment 1
Performance (5308)
Opens the SynOptics 5000 Ethernet Attachment
Performance View.
Redundancy Table
(5378-F)
Opens the SynOptics 5000 Ethernet Module Redundancy
Table which contains the Redundant Port Table.
Cluster X Configuration
(5378-F)
Opens the Configuration View for the selected (X) cluster.
Cluster X Performance
(5378-F)
Opens the Performance View for the selected (X) cluster.
Local Channel X
Performance (5308P,
5378-F, 5308A, 5304P,
5307)
Opens the Performance View for the selected (X) local
channel.