Specifications

9031398 E3
xiii
Preface
Use this guide as a reference for the SynOptics Series 5000 management
module and to configure and manage the Ethernet, Token Ring, or FDDI
modules within that management module through SPECTRUM. Before
reading this guide, become familiar with SPECTRUM’s functions. Also,
become familiar with any network management and hardware requirements
described in the SynOptics Series 5000 Hub documentation.
What Is in This Guide
This Guide contains some differences from most SPECTRUM Management
Module Guides. There are no Configuration or Application view chapters. All
Application views are available through the Device or Chassis Management
views. The Configuration views are discussed in the appendices which are
organized by module type, or in chapters organized by DCE and NMM
Management. The following chapter and appendix descriptions outline the
organization of the SynOptics Series 5000 Management Module Guide:
Chapter Description
Chapter 1
Introduction
Describes the device, the management module and
model types. This chapter also provides
information on accessing device-specific views.
Chapter 2
Device Views
Describes the Device views for the SynOptics
Series 5000 hub.
Chapter 3
Chassis Management Views
Describes the Chassis Management views that are
used to manage the SynOptics Series 5000 hub.
The views dscribed in this chapter are also
accessible through the Application view.
Chapter 4
NMM Management Views
Describes the Network Management Module
(NMM) management views that are used to
manage the SynOptics Series 5000 hub.
Chapter 5
DCE Management Views
Describes the Data Collection Engine (DCE)
management views that are used to manage the
SynOptics Series 5000 hub.
Chapter 6
Event and Alarm Messages
Lists and explains the event and alarm messages
generated in the Event Log or Alarm Manager for
the SynOptics Series 5000 hub chassis and NMM
Agents.