Specifications

FDDI NMM Agent Events and Alarms
Event and Alarm Messages
6-12
SynOptics Series 5000
Management Module Guide
CsEvFormat/Event3600011c
{d “%w- %d %m-, %Y - %T”} Port {O 2} has
exhibited elasticity buffer errors. The
elasticity buffer error count is {I 1}. {t}
(name - {m}). (Trap type:
1.3.6.1.4.1.45.6.43) - (event [{e}])
CsPCause/Prob3600011c
FDDI PORT ELASTICITY BUFFER
ERROR
PROBABLE CAUSE:
A port has exhibited elasticity buffer
errors. A station may be transmitting
frames that are too long. Or a station
may be using a clock that is out of
tolerance.
RECOMMENDED ACTIONS:
1) Make sure the latest software drivers
are running on the station attached to
the port reporting the problem or
immediately upstream of the problem.
2) Check for faulty hardware.
3) Monitor the port to determine that
the condition does not persist.
4) Check for other signs of ring
instability such as high Ring_Op, Lost
Frame, or Error Frame counts.
CsEvFormat/Event3600011d
{d “%w- %d %m-, %Y - %T”} The {T
T3600011d_RING 3} dual ring peer wrap
flag is {T T3600011d_PEER 4} at a station.
Attachment configuration for the station is
{T T3600011d_TCFS 1}. SMT entry
number is {O 2}. {t} (name - {m}). (Trap
type: 1.3.6.1.4.1.45.2.7.0.6.1) - (event [{e}])
CsPCause/Prob3600011d
FDDI SMT PEER WRAP
PROBABLE CAUSE:
The dual ring is wrapped at a station
(wrapA or wrapB). Note that this is a
legal configuration and may be
intentional.
RECOMMENDED ACTION:
Verify all connections.
CsEvFormat/Event3600011e
{d “%w- %d %m-, %Y - %T”} Two or more
stations with the same MAC address have
been detected on the network. {t} (name -
{m}). (Trap type: 1.3.6.1.4.1.45.2.7.0.6.2) -
(event [{e}])
No Probable Cause Message
Table 6-3. FDDI NMM Agent Events and Alarms (Continued)
Message in the Event Log
Alarm Manager Probable Cause
Message