Specifications

9031398 E3 Event and Alarm Messages
6-9
FDDI NMM Agent Events and Alarms
CsEvFormat/Event3600010b
{d “%w- %d %m-, %Y - %T”} A board power
supply failure has been detected. The slot
is {I 2}. The power supply status is {T
BdPSStatus 1}. {t} (name - {m}). (Trap type:
1.3.6.1.4.1.45.3.2.1.6.27,
1.3.6.1.4.1.45.3.2.2.6.27,
1.3.6.1.4.1.45.3.12.1.6.27) - (event [{e}])
CsPCause/Prob3600010b
MODULE POWER SUPPLY FAILURE
A module’s power supply has failed.
Replace the power supply.
CsEvFormat/Event36000110
{d “%w- %d %m-, %Y - %T”} The module in
slot {O 2} has the status LED off. The
module status is {T BoardStatus 1}. {t}
(name - {m}). (Trap type:
1.3.6.1.4.1.45.3.2.1.6.11,
1.3.6.1.4.1.45.3.2.2.6.11,
1.3.6.1.4.1.45.3.12.1.6.11) - (event [{e}])
CsPCause/Prob36000110
BOARD LED FAILURE
Verify the module’s operational status.
Power down the concentrator and reseat
the module. If the situation continues,
replace the module.
CsEvFormat/Event36000115
{d “%w- %d %m-, %Y - %T”} FDDI logical
topology change notification. The number
of Primary ring changes is {I 1}, Secondary
ring is {I 2}. The number of logical path
topology changes is {I 3}. {t} (name - {m}).
(Trap type: 1.3.6.1.4.1.45.6.36) - (event
[{e}])
No Probable Cause Message
CsEvFormat/Event36000116
{d “%w- %d %m-, %Y - %T”} The link error
monitor has observed a link error rate
cutoff or alarm threshold condition on port
{O 2}. The long term average link error
rate is {I 5}. The estimate greater than or
equal alarm condition is {T
T36000116_LCon 1}. Cutoff is {I 3}. Alarm
Threshold is {I 4}. {t} (name - {m}). (Trap
type: 1.3.6.1.4.1.45.6.37) - (event [{e}])
CsPCause/Prob36000116
FDDI PORT LINK ERROR CONDITION
PROBABLE CAUSE:
The link error monitor has observed a
port with a link error rate beyond either
the link error rate cutoff or the alarm
threshold.
RECOMMENDED ACTION:
Check the device transceiver and/or the
wiring connections.
Table 6-3. FDDI NMM Agent Events and Alarms (Continued)
Message in the Event Log
Alarm Manager Probable Cause
Message