Specifications

FDDI NMM Agent Events and Alarms
Event and Alarm Messages
6-8
SynOptics Series 5000
Management Module Guide
CsEvFormat/Event00010811
{d “%w- %d %m-, %Y - %T”} - RMON
falling threshold trap received from model
{m} of type {t}. AlarmVariable {O 2},
AlarmSampleType {I 3}, AlarmValue {I 4},
and AlarmFallingThreshold {I 5}.
No Probable Cause Message
CsEvFormat/Event01020001
{d “%w- %d %m-, %Y - %T”} A “hot swap”
has been detected in slot {O 2} (slot is
second digit). Operational state is {T
Syn5OpTable 3}. {t} (name - {m}). (Trap
type: 0x01) - (event [{e}])
CsPCause/Prob01020001
DCE CONTACT LOST
PROBABLE CAUSES:
1) One or more DCE’s on the NMM
have lost contact.
RECOMMENDED ACTIONS:
1) Check the Device View to ensure the
DCE is on a backplane segment that has
a network feed.
2) Check the network connection to
the backplane segment that the DCE is
monitoring.
CsEvFormat/Event36000100
{d “%w- %d %m-, %Y - %T”} A failure has
been detected in either the primary power
supply, the secondary power supply or
both. The power supply status is {T
ChasPSStatus 1}. {t} (name - {m}). (Trap
type: 1.3.6.1.4.1.45.3.2.1.6.0,
1.3.6.1.4.1.45.3.2.2.6.0,
1.3.6.1.4.1.45.3.2.3.6.0) - (event [{e}])
No Probable Cause Message
CsEvFormat/Event36000101
{d “%w- %d %m-, %Y - %T”} One or more
fans are either non-operational or have an
unknown operating status. The reported
fan status is {T ChasFanStatus 1}. {t}
(name - {m}). (Trap type:
1.3.6.1.4.1.45.3.2.1.6.1,
1.3.6.1.4.1.45.3.2.2.6.1,
1.3.6.1.4.1.45.3.2.3.6.1) - (event [{e}])
CsPCause/Prob36000101
CONCENTRATOR FAN FAILURE
One or more fans are either non-
operational or have an unknown
operating status.
Replace the fan or fan assembly.
Table 6-3. FDDI NMM Agent Events and Alarms (Continued)
Message in the Event Log
Alarm Manager Probable Cause
Message