Specifications

9031398 E3 DCE Management Views
5-15
Token Ring DCE Management Views
Insertions
Displays the number of times that the station was detected inserting into the
ring.
Allows update of the information in the table.
Allows toggling between a MAC and Canonical representation of the station’s
address in the MAC Address field.
Allows setting of a value to filter a selected column against, or clearing a
previously set filter value.
Allows sorting of the table based on the values in a selected column.
DCE Station Isolating Errors Table View
The DCE Station Isolating Errors Table view provides a listing of all the
stations the DCE detects on the ring, and provides a breakdown of the
Isolating Errors for each. This table also has several buttons allowing change
of the presentation of information and sorting through the stations. Double-
click a row in the table to access the Station Detail view which contains two
color-coded pie charts that provide a breakdown of Isolating and Non-Isolating
Errors.
The DCE Station Isolating Errors Table view provides the following
information:
MAC Address
Displays the MAC Address of the station.
In Line
Displays the total number of line errors reported by the station in error report
frames, and detected on the ring.
Out Line
Displays the total number of line errors reported by the nearest active
downstream neighbor of the station in error report frames, and detected on
the ring.
In Burst
Displays the total number of burst errors reported by the station in error
Update
MAC/Canonical
Set Filter/Clear Filter
Sort Up/Sort Down/Unsort