Hardware reference guide

Interface Specifications
30 • Specifications Palo Alto Networks
Interface Specifications
Table 10 lists the interfaces for the PA-5000 Series.
Electrical Specifications
Table 11 lists electrical specifications for the PA-5000 Series.
Table 10. Interface Specifications
Specification Description
Ethernet ports 12 RJ-45 10/100/1000 ports for network traffic.
SFP ports Eight Small Form-Factor Pluggable (SFP) ports for network traffic.
SFP+ ports PA-5060/PA-5050 only: Four 10 Gigabit Small Form-Factor Pluggable
(SFP+) ports for network traffic.
Management ports One RJ-45 port to access the device CLI through an Ethernet interface.
Management console port One RJ-45 port for connecting a serial console. Use these settings:
– Data rate: 9600
– Data bits: 8
– Parity: none
– Stop bits: 1
– Flow control: None
High-availability (HA) port Two RJ-45 ports for high-availability control and synchronization.
USB ports Two USB ports for future use.
Table 11. Electrical Specifications
Specification Description
Maximum internal power dissipation 450W
AC voltage 100-240 VAC, 8-4A, 50-60 Hz
DC voltage -40 to -72 VDC, 15A