Hardware reference guide

Connecting Power
12 • Installing the Hardware Palo Alto Networks
Figure 6 shows the cable connections of the PA-5020. Refer to Table 2 for descriptions of the front
panel interfaces.
Figure 6. Cable Connections for the PA-5020
Connecting Power
Figure 7 shows the AC power connections for the PA-5000 Series.
Figure 7. Power Connection for the PA-5000 Series
To power up the PA-5000 Series, attach a power cable to each of the power supplies and plug each into
a grounded wall outlet. The device has no power switch and is automatically powered when one or more
power cables are connected to the device and to an AC power source.
1 3 5 7 9 11 13 15 17 19
2 4 6 8 10 12 14 16 18 20
USB
SFP
HA2
HA1
Console
Management
Network