Installation guide

3-17Remote Annex 4000 Hardware Installation Guide
Chapter 3 ROM Monitor Commands
If the self-boot option is not installed, the command display looks like
this:
help
Entering help,or?, displays brief descriptions of the Remote Annex
4000 ROM Monitor commands.
W
ARNING
monitor:: erase
Erase all non-volatile EEPROM memory? (y/n) [n]:: y
Erasing <65504 or 8160 bytes> of non-volatile memory. Please
wait...
16K->|Data 0xff
.................................................
16K->|Data 0x0
.................................................
Initialized checksum record installed
Erasing <65504 or 8160 bytes> of non-volatile EEPROM memory