Installation guide

Remote Annex 4000 Hardware Installation Guide
Chapter 2 Installing the Remote Annex 4000
2-12
7 Slide the dress panel cover back to its original position by sliding it
toward the front of the Remote Annex 4000 (see
Figure 2-12).
Figure 2-12. Securing the Dress Panel Cover
If the cables are shielded (metal), the cable retainers may obstruct
the PBX end, preventing you from securing the dress panel cover.
You may need to remove the cable retainers.
8 Connect the Remote Annex 4000 fan-out cables to your serial
devices.
See Appendix B for a description of the fan-out cable.
Shielded cables are required for compliance with
VDE EMI limits.
Dress Panel Cover