Installation guide

2-11Remote Annex 4000 Hardware Installation Guide
Chapter 2 Installing the Remote Annex 4000
4 Tighten the screw on the PBX end of the cable (see Figure 2-10).
Figure 2-10. Securing the PBX Cable
5 Slide the cable retainer forward, making sure that the lip of the
retainer secures the connector (see
Figure 2-11).
6 Tighten the screws that secure the cable retainer.
Figure 2-11. Securing the PBX Connector
PBX Screw
Cable Retainer Screw