Installation guide

2-9Remote Annex 4000 Hardware Installation Guide
Chapter 2 Installing the Remote Annex 4000
After the Remote Annex 4000 boots, you can invoke a console monitor
by pressing . At the console monitor prompt, entering help
displays the available options. See Chapter 3 for information on the
ROM Monitor commands.
Connecting Serial Devices
The Remote Annex 4000 provides three to twelve 50-pin PBX
connectors (depending on the port configuration) for attaching 1 to
72 devices using Remote Annex 4000 asynchronous (fan-out) cables.
To attach the cables:
1 Remove the dress panel cover by sliding it forward. This cover is
located on the top rear of the Remote Annex 4000 (see
Figure 2-7).
Figure 2-7. Removing the Remote Annex 4000 Dress Panel Cover
Return
Dress Panel Cover