Installation guide

Remote Annex 4000 Hardware Installation Guide
Appendix C Port Upgrade Instructions
C-8
2 Secure the cover and cable retainers using ten screws
(see
Figure C-10).
Do not over-tighten these screws (beyond 10 in-
lbs. of torque).
Figure C-10. Securing the Cover
Power-up and Test
The following instructions describe the power-up and test sequence.
1 Reconnect all the cables, including:
❑ The transceiver cable.
❑ Existing cables for the serial devices.
❑ The parallel printer cable.
❑ The console terminal cable.
❑ The power cord.