Installation guide

Remote Annex 4000 Hardware Installation Guide
Appendix C Port Upgrade Instructions
C-4
6 Remove the four pan-head Phillips screws and the dummy plate
(see
Figure C-4).
Figure C-4. Removing the Dummy Plate
Installation Instructions
The following instructions describe how to install an additional
asynchronous SLC.
Observe handling precautions: electrostatic-sensitive devices.
1 Lower the SLC onto the MLB; keep the SLC horizontal (see
Figure C-5).
Align the SLC with the MLB to avoid bending the pins during
installation.
Screws
(4 Places)
Dummy
Plate