Installation guide

Remote Annex 4000 Hardware Installation Guide
Chapter 4 Troubleshooting Procedures
4-22
Each dump file contains a complete image of the Remote Annex 4000
RAM memory and hardware state. The amount of space required for
a dump file varies according to the port configuration. The ROM
Monitor config command displays the amount of memory for the
Remote Annex 4000.
Table 4-9 shows sample dump file names. All pathnames are relative
to the file /usr/spool/erpcd/bfs.
Table 4-9. Dump File Naming Conventions
Remote Annex
4000 Address
Network
Address
BSD
Filename System V Pathname
63.0.0.75 63 dump.63.0.0.75 dump/63/0.0.75
131.140.23.1 131.140 dump.131.140.23.1 dump/131.140/23.1
195.46.2.15 195.46.2 dump.195.46.2.15 dump/195.46.2/15