User`s manual

3
2.1 Indicator enclosure: all stainless steel
2.2 Indicator display angle adjustable (≥ 90º)
2.3 Mount style: table and wall
2.4 IP66
2.5 Two operation modes: weighing and check weighing
2.6 Complete keyboard calibration
2.7 Auto rectifying
2.8 Zero position auto tracking
2.9 Digit filtering
2.10 Full range tare
2.11 Overload indicating
2.12 Three-point (over, accept, under) indicating
2.13 Target-value weight weighing
2.14 Two setup modes of check weighing
a. Weight value input mode
b. Percentage mode
2.15 Unit conversion
2.16 RS-232 output (option)
2.17 Charge and battery voltage indicating
2.18 LED backlight and lighting mode set
2.19 Auto shut-off selecting
2.20 Printing function under normal weighing state
2. MAIN FEATURES
1.1 Signal input range: 0mV ~ 8mV
1.2 Zero point temperature drift 0.15 V/ºC
1.3 Sensitivity temperature drift 10 ppm/ºC
1.4 A/D conversion resolution ration: 500000
1.5 Display resolution ration: 30000
1.6 A/D conversion rate: 168T/S
1.7 Display update rate: 10T/S
1.8 Accuracy class: 3
1.9 Min. Display value: 1/ 2/ 5 available
1.10 Non-linearity error: 0.01%F·S.
1.11 Baud rate: 600, 1200, 2400, 4800, 9600 (option)
1.12 Load cell excitation voltage: DC5V, drives up to 4 load cells of 350 .
1.13 Operation temperature: 0 ~ 40 ºC
1.14 Storage temperature: -25ºC ~ 55ºC
1.15 Relative humidity: 90% (no condensation)
1.16 Power supply: DC 6V5Ah, free-maintenance storage battery and power adaptor of 9V, 500 mA.
1.17 Working time of storage battery power: ≥ 100 hours
(Fully charged, backlight off and drives only 1 load cell of 350 )
1.18 Display style: 6-digit 1-inch 7-segment LCD.
1.19 Dimensions: 300x350 mm, 500x400 mm.
1.20 Peso neto: 3 Kg
≤ μ
≤
≤
Ω
≤
Ω
≤
1. MAIN DATA
USER’S MANUAL CWP. Bench scale