PART LIST 1x1 left side panel 2x1 middle divider 3x1 right side panel ASSEMBLY INSTRUCTION 4x1 bottom panel 7x1 top panel 10 x 2 left/right apron 5x1 large back panel 8x 1 door 11 x 2 front/back apron 6x1 small back panel 9x1 door handle 12 x 4 apron block 13 x 4 wooden leg HARDWARE LIST A x 6 cam lock pin D4x30mm F x 2 hinge K x 8 washer B x 6 cam lock G x 16 screw D4x10mm L x 1 screw D4x10mm C x 12 wooden dowel H x 16 screw D4x25mm D x 6 screw D4x30mm I x 6 screw D4x40mm M x 1
01 02 03 C ③ ⑤ D ⑥ ② ① C ④ D C D Fix bottom panel (4) to left/middle/right panel (1,2,3,)with screw (D) and wooden dowel (C). 04 Put in the large back planel (5) and the small back planel (6). 05 Lock top panel (7) on assemlied part “Step 02” with cam lock pin/cam lock /wooden dowel (A,B,C) as shown. 06 ④ Use screw (G) to fix door (8) with hinge (F),and fix door handle (9) and magnet (E) with screw (G).
06 Use 2 screws (J) to lock the wooden leg (13) on the part of "step 5" through washer (K), repeat four times. 08 07 Lock nylon strap (O) on top panel (7) with a screw (L).Make a hole in the right position on the wall, put wall anchor (N) into the hole, and lock nylon strap (O) on wall anchor (N) with a screw (M), as shown in the figure. Finish assembly.
