Assembly

1 x 2 2 x 2 3 x 1 4 x 1 5 x 2

metal leg top metal support tube bottom metal support tube top panel back support wire

B x 4 C x 6 D x 1 E x 1A x 6

bolt

ASSEMBLY INSTRUCTION

PART LIST

HARDWARE LIST

bolt

screw wall anchor

screw

D6X35mm D6X12mm D4X25mm D4X30mm

G x 2 H x 1F x 1

nylon strap

washer

hex wrench

PAGE 1
ASSEMBLY INSTRUCTION PART LIST 1x2 metal leg 2x2 top metal support tube 3x1 bottom metal support tube 4x1 5x2 top panel back support wire HARDWARE LIST A x 6 bolt B x 4 bolt C x 6 screw D6X35mm D6X12mm D4X25mm F x 1 nylon strap G x 2 H x 1 hex wrench washer D x 1 screw D4X30mm E x 1 wall anchor
PAGE 2
01 02 C C H C C C G C F 4 Fix 2 metal legs to top/bottom metal support tubes(2,3) with screw (A) by using hex wrench(H). 03 E 04 B Fix assembled part “Step 01”to top panel with screw (C),fix nylon strap (F) with screw (C) and washer (G) as shown. Wand F G D 05 5 B B 5 B Lock the back support wire (5) on the left and right metal legs (1) with screw (B).