Technical data

10.0 Changing Components
25
10.6 Control Panel
1. Disconnect the control panel connector from
the front of the valve bracket (Fig. 79).
2. Lift the surround trim away from combustion
box (Fig. 78).
3. Remove the cable clamp which secures the
control panel cable (Fig. 80).
4. Remove the two control panel securing nuts
and remove the panel (Fig. 80).
5. Fit the new control panel taking care not to
overtighten the securing nuts and reassemble in
reverse order.
Fig. 79
Fire Surround Trim
Fig. 78
Control Panel Connector
Fig. 80
Fire Surround Trim
Fire Surround Trim
Control Panel
Cable Clamp