Technical data

5.0 Installation

5.4 Fitting the Fire (continued)

7. Fit the fire gas supply pipe at the motorised

valve inlet (Fig. 18).

8. Fit the fire gas supply pipe to the gas service

cock on the right hand side of the boiler base

ensuring gas soundness is done at both

connections on the gas supply pipe (Fig. 19).

9. Connect the electrical supply to the fire from

the boiler (Fig. 17).

10. Unpack the glass and fit two of the amber

pieces vertically between the tabs at the rear,

and the remaining one between the two bulbs at

the front (Fig. 20).

11. Lay the glass retaining assembly into the

opening in the fire box, locating the slot over the

central back tab (Fig. 21).

Fire Gas

Supply Pipe

Fig. 18

Fig. 17

Fig. 19

Fire Gas Supply Pipe

at Service Cock end

Control Box

Electrical Supply

From Boiler

Base

Amber Glass Pieces

Combustion Box Base

Glass Retaining

Assembly

Fig. 20

Amber Glass Pieces

Fig. 21

Central Back Tab