Technical data

5.0 Installation

5.6 Assembly of Rear Flue

1. Remove the rear air box blanking plate from

the back plate by releasing the three screws

(Fig. 30).

2. Remove the blanking cap at the rear of the

turret, by pushing and turning anti-clockwise to

release the bayonet fitting (Fig. 30).

3. Locate the flared end of the flue duct over the

bayonet fitting on the turret, taking care not to

damage the 'O' ring. Lock the flue duct in place by

pressing in and turning clockwise (Fig. 31).

4. Engage the bayonet slots of the air duct over

the location lugs on the back plate opening and

press and turn clockwise to secure the air duct to

the back plate (Fig. 32).

5. In order to increase security of the flue, the

bayonet tags may be deformed to secure the flue

in position.

6. Take the flue terminal assembly and engage

on the flue and air ducts. Slide the flues together

to the desired wall thickness.

7. Tape the sections of the outer ducts together

with the tape provided ensuring a good seal is

made (Fig. 33).

Fig. 30

Fig. 31

Fig. 32

Flue Duct

Air Duct

Tape

Fig. 33

Air Box

Blanking Plate

Blanking

Cap

Backplate