Brochure

Package components
Solar Hydraulic Pump Station
The pump station is compact and incorporates all hydraulic
functions in a neat package to ensure thermal safety.
Features
Solar pump
Service isolation valves fitted as standard
Large, easy to read temperature and pressure gauges fitted
as standard
Optional relay to control immersion heater back up
Fully insulated
Fill and drain points
Air separator
Auxiliary heating re-heat sensor
Technical Data
Height 375mm
Width 250mm
Depth 190mm
Max continuous working temperature 120°C
Max short term temperature 160°C
Pressure relief valve setting 6bar
Check valve operating pressure 20mbar
Solar Controller
The solar controller has a pictorial display making it easy
to operate. It can control up to two collector fields
e.g East/West array.
Features
Simple menu driven programming
Adjustable temperature differential regulation
Battery back up stores set values
Fitted into pump station as standard to simplify installation
Can be easily removed and remotely fitted elsewhere in
the home
Supplied with temperature sensors for solar control, solar
gain and auxiliary reheat
Large clear multi-function LCD display with backlight
Ability to control auxiliary heat source
Advanced control functions
System status and fault finding
Can control up to two collector fields (e.g. East/West array)
Can control up to two solar cylinders
Can display solar gain
Technical Data
Height 134mm
Width 175mm
Depth 56mm
Fault display functions Yes
Auxiliary heat control Yes
Solar gain measurement Yes
Baxi provides complete solar packages which enable the installer to easily fit the whole system. Additional
solar accessories can be easily obtained to support Baxi solar packages (refer to the accessories section on
page 14 for further details). All the components are covered by a 2 year parts and labour warranty subject
to registration and an annual service.
To complete the system, add a Heatrae Sadia solar cylinder (refer to pages 15 and 16 for further details).
7
350622-09.indd 8 03/07/2012 18:33