Technical data

15
6.0 System Details
© Baxi Heating UK Ltd 2012
6.7 Controls Component Options for
Intelligent Installations
1. A THINK Controller is mounted on the appliance as
standard (It can be mounted on a wall cradle and configured
to use as an room sensor).
IMPORTANT: Before running the appliance ensure
parameter 5700 has been set according to the type of
system installed. See sections 10.4 to 10.11 for system types
and section 11.3.k for the change procedure.
2. There Are 4 other optional control components as well as
the THINK Controller which can be used in conjunction with
the Ecogen appliance these are: -
• A wired 5 LED Receiver – to run on or off the appliance.
• An RF 5 LED Receiver - to run on or off the appliance.
• A wired Wall cradle for the THINK Controller or either
5 LED Receiver.
• An RF Wall cradle for the THINK Controller.
3. The following Kits are available: -
A) A wired Wall cradle with a wired 5 LED Receiver.
B) An RF Wall cradle with An RF 5 LED Receiver.
C) An RF Wall cradle with a THINK Controller.
D) A wired Wall cradle with a THINK Controller.
These can be combined to give the following set ups in the
property
1a
Room
Unit 1
Room
Unit 2
Kit A or D Kit D
Operator
Unit
All wired connections
RF
5 LED
*
Kit D Kit D
Operator
Unit
All RF connections or mixed
Kit B Kit C
RF Cradles
Wired
Cradles
2 Room Units
Maximum
* A THINK Controller here implies that the RF facility is not being used - the
customer has reverted to an all wired system
5 LED
Wired Cradle with
either 5 LED Receiver or
THINK Controller
Complete with either of the options
shown above. Depending on the exact
configuration desired it may be
necessary to purchase single items.
Kit A or B
Operator
Unit
All RF connections or mixed with the user reset off appliance
NOTE:- Either a 5 LED Receiver or a THINK Controller must be fitted to the
appliance for the safety of the user or visiting service personnel.
Wired
Cradles
1a - THINK Controller or 5 LED Receiver